
Mallet: A mallet is a type of hammer with a head made of softer material than the still normally used in the hammerheads.

hammer: A

Screwdriver: The screwdriver is a device specifically designed to insert and tighten, or to loosen and remove, screws.
Screw: A screw is a shaft with a helical groove or thread formed
on its surface and provision at one end to turn the screw.

Clamp: Is a fastening device to hold or secure objects tightly togheter to prevent mavement.


Spade: A spade is a special tool for to move the earth.

Pickaxe: Is a hand tool with a hard head attached perpendicular to the handle.

Nut: A nut is a type of hardware fastener with a threaded hole.
Handsaw: In woodworking and carpentry, handsaws, also knowns as panel saws, are used to cut pieces of wood.

Drill: Is a tool with a rotating drill bit used for drillig holes in various materials.

Chisel: A chisel is a tool with a characteristically shaped cutting edge of blade on its end, for carving and/or cutting


Pliers: Are hand tools designed primarily for gripping objects by using leverage.
Nail file: A nail file is a tool used to gently grind down and shape the

cutter:is a common tool used in various trades and crafts for a variety of purposes.


Wrench: Is a tool used to provide a mechanical advantage in applying torque to turn bolts, nuts or other hard-to-turn items.
Grinding machine: Is a machine tool used for producing very fine finishes or making very light cuts, using an abrasive wheel as the cutting device.


Spackle: Is a hand tool and is used for scraping surfaces or spreading material such as plaster in various construction trades.

Goggles: Are forms of protection eyewear
that usually enclose or protect the eye area in order to prevent particulates, water or chemicals from striking the eyes.

sickle: is a hand-held agricultural tool with a curved blade typically used for harvesting grain crop or cutting grass for hay.

Hoe :is a tool used generally in agriculture and also in different types of works, formed(trained) by a sheet with

No hay comentarios:
Publicar un comentario